docker CLI program is independent of the Docker daemon which runs your containers. Although both components usually run on your local machine, you can run
docker commands against a remote Docker host.
Using a remote host can be helpful in a few scenarios. You might set up a shared Docker Engine installation for a small development team. Each developer could then connect to the remote containers with their local
docker exec command.
Remote hosts are more frequently valuable when you’ve got a powerful server going unused. If your laptop’s slow or running out of storage, using a dedicated Docker host on your network can greatly increase performance. You still get all the convenience of the local
docker CLI in your terminal.
Setting Up The Remote Host
Make sure you’ve got Docker installed on the system which will be your remote host. You only need the
docker-cli package on your local machine, as you won’t be running Docker Engine.
A fresh Docker installation provides a Unix socket by default. Remote access requires a TCP socket. Run
dockerd (the Docker daemon executable) with the
-H flag to define the sockets you want to bind to.
sudo dockerd -H unix:///var/run/docker.sock -H tcp://0.0.0.0:2375
This command will bind Docker to the default Unix socket and port 2375 on your machine’s loopback address. You can bind to additional sockets and IP addresses by repeating the
The flags need to be passed each time you run
dockerd. If you want them to persist after reboots, either create a shell alias or modify the Docker service definition. Here’s how you can achieve the latter with
systemd, which most Linux distributions use for service management.
/etc/systemd/system/docker.service.d/options.conf (or create it if it doesn’t exist). Find the
[Service] section and change the
[Service] ExecStart=/usr/bin/dockerd -H unix:///var/run/docker.sock -H tcp://0.0.0.0:2375
systemd configuration to apply the changes:
sudo systemctl daemon-reload
If Docker’s already running, use
sudo systemctl restart docker to restart the service. The Docker daemon will now bind to TCP port 2375 each time it starts. Make sure traffic to the port is permitted by your firewall configuration. If you’re using ufw, run
ufw allow 2375 to open the port.
Connecting To The Remote Host
The Docker CLI uses the
DOCKER_HOST environment variable to determine the host to connect to. The local daemon’s Unix socket will be used when the variable isn’t set.
You can use a remote host for a single
docker command by prepending the
DOCKER_HOST=tcp://192.168.0.1:2375 docker run httpd:latest -d
This will start a new container from the
httpd:latest image using the Docker engine at
If you’re going to be running multiple commands in one session, export the
DOCKER_HOST variable into your shell:
export DOCKER_HOST=tcp://192.168.0.1:2375 docker run httpd:latest -d --name httpd docker ps docker rm httpd --force
You can make
docker always use a remote host by setting
DOCKER_HOST globally in your shell’s configuration file. Here’s how you’d do that in Bash:
echo "export DOCKER_HOST=tcp://192.168.0.1:2375" >> ~/.bashrc
DOCKER_HOST environment variable will be set each time your shell starts.
The basic TCP socket is unprotected. Anyone who can reach your machine over the network can use the Docker socket to control your containers.
Docker supports SSH instead of TCP. This is usually a better option if the host has an SSH server available. It prevents unauthenticated users from gaining access. Using SSH requires no extra configuration.
DOCKER_HOST lets you pass in an SSH connection string:
DOCKER_HOST=ssh://user@hostname docker run -d --name httpd
Alternatively, you can use SSH bindings to directly bind the remote host’s Docker Unix socket to your local machine:
ssh -L /var/run/docker.sock:/var/run/docker.sock
Now you don’t need to use
DOCKER_HOST at all. The remote
docker.sock will be bound to its local counterpart. Docker will auto-detect this as its standard Unix socket.
Using one of the SSH-based solutions is the preferred way to approach Docker daemon security. Docker also supports TLS if you supply a certificate authority and server and client keys:
dockerd --tlsverify --tlscacert=ca.pem --tlscert=cert.pem --tlskey=key.pem -H=0.0.0.0:2375
Now clients will be able to connect on port 2375 if they present a valid SSL certificate trusted by the certificate authority
Docker lets you set up several “contexts” for connecting to different hosts. Contexts can be used instead of the
DOCKER_HOST environment variable. They make it easier to switch between multiple remote hosts.
docker context create --docker host=tcp://192.168.0.1:2375 --description remote docker context create --docker host=unix:///var/run/docker.sock --description local
These commands create two different contexts – one for your local
docker.sock and one for a remote connection.
You can switch between contexts using the
docker context use command:
docker context use remote # Container is started on "remote" docker run httpd:-latest -d docker context use local # Lists containers running on "local" docker ps
Contexts are useful when you work with several Docker hosts. They’re less hassle than continually resetting the
DOCKER_HOST variable as you move betwen hosts.
Drawbacks of Remote Hosts
We noted earlier that a remote host can improve build performance. This statement’s only true if the machine running Docker Engine is quicker than your local hardware. The biggest drawback of a remote host is the extra overhead of interacting over the network. You also become dependent on the network – if you lose connectivity, you won’t be able to manage your containers.
You should have a reliable high-speed network connection if you’re going to use a remote host as your main build server. The first
docker build stage sends the contents of your image’s build context (usually your working directory) to Docker Engine. This is quick when Docker’s running locally but might take much longer to upload to a remote machine.
Exposing a Docker daemon instance over the network is a security risk. You need to make sure access is restricted to authorised users and devices. Unintentional exposure of a Docker daemon socket could give attackers limitless access to the host. Docker usually runs as
root so it’s critical that only trusted individuals can start containers.
Setting up a remote Docker host lets you separate your container instances from your local development machine. A dedicated Docker build server can offer improved performance and greater image storage space.
You should take care to audit the security of your implementation. A plain TCP socket might be safe on a private network but shouldn’t be deployed in any sensitive environment. Using SSH helps mitigate the risks if you practice good SSH security hygiene, such as mandatory key-based authentication.
- › “Atari Was Very, Very Hard” Nolan Bushnell on Atari, 50 Years Later
- › NZXT Signal 4K30 Capture Card Review: Lossless High-Quality Footage
- › T-Mobile Is Selling Your App Activity: Here’s How to Opt Out
- › The 10 Best Netflix Original Movies in 2022
- › A World Without Wires: 25 Years of Wi-Fi
- › What’s New in Windows 11’s 22H2 Update: Top 10 New Features