Today we’re taking a look at the home networking hardware: what the individual pieces do, when you need them, and how best to deploy them. Read on to get a clearer picture of what you need to optimize your home network.
When do you need a switch? A hub? What exactly does a router do? Do you need a router if you have a single computer? Network technology can be quite an arcane area of study but armed with the right terms and a general overview of how devices function on your home network you can deploy your network with confidence.
Rather than start off with a glossary of networking terms—and in the process slam you with a technical terms with no easy point of reference—let’s dive right into looking at network diagrams. Here is the simplest network configuration available: a computer linked directly to a modem which is in turn linked through a phone line/cable/fiber optic uplink to the individual’s internet service provider.
It doesn’t get less complicated than this arrangement but there is a price to pay for the ultra-simplicity of the setup. This user cannot access the internet with a Wi-Fi device (thus no access for smart phones, tablets, or other wireless devices) and they lose out on the benefits of having a router between their computer and the greater internet. Let’s introduce a router and highlight the benefits of using one. In the diagram below we’ve introduced two elements to the network: a wireless router and a laptop connecting to the network via that wireless connection.
When should you use a router? Given the low cost of home routers and the benefits gained from installing one on your network you should always use a router (which almost always includes a firewall feature).
Home routers are actually a a combination of three networking components: a router, a firewall, and a switch. In a commercial setting the three pieces of hardware are kept separate but consumer routers are almost always a combination of both the routing and switching components with a firewall added in for good measure. First let’s look at what the router function does.
At the most basic level a router links two networks together, the network within your home (however big or small) and the network outside your home (in this case, the Internet). The broadband modem provided to you by your ISP is only suited to linking a single computer to the internet and usually does not include any sort of routing or switch functionality. A router performs the following functions:
In addition to the inside-to-outside network functionality outlined above, home routers also act as a network switch. A network switch is a piece of hardware that facilitates communication between computers on an internal network. Without the switching function the devices could talk through the router to the greater internet but not to each other—something as simple as copying an MP3 from your laptop to your desktop over the network would be impossible.
Most routers have four Ethernet ports which allow you to plug in four devices and have them communicate via the switch function. If you need more than four Ethernet connections you’ll need to upgrade to a router with a larger port bank (a rather expensive proposition that will usually only boost you up to eight ports) or you can pick up a dedicated switch. Note: You only need to upgrade if you’re running out of physical ports for hard line connections. If you only have one computer and one networked printer plugged into your four-port router (and everything else on your network is Wi-Fi based) there is no need to upgrade to gain physical ports. That said, let’s take a look at a network with a dedicated switch.
Although the four-port limit on the super majority of home routers was more than enough for most home users, the last 10 years have brought a significant increase in the number of networkable devices within the home. It isn’t uncommon to have multiple computers, multiple game consoles, media centers, printers, file servers, and more that all connect to the Ethernet LAN (while you may get away with putting your Wii on the Wi-Fi network for things like dedicated video streaming and media server access it is much preferable to have a hard line connection). Once you’ve reached that level of device saturation it’s necessary to add in a switch with eight, 16, or more ports to properly support your growing home network.
As a side note, historically people often relied on hubs because they were so much cheaper than pricey switches. A hub is a a simple network device that does not examine or manage any of the traffic that comes through it—it’s a “dumb” network device—by contrast switches actually interact with the data packets and actively direct them. Because hubs have no management component there are frequent collisions between packets which leads to an overall decrease in performance. Hubs suffer from a number of technical shortcomings which you can read about here. Consumer grade networks switches have fallen in price so steeply over the last 10 years that very few hubs are even manufactured anymore (Netgear, one of the largest manufacturers of consumer hubs, no longer even makes them). Because of the shortcomings of network hubs and the low prices of quality consumer-grade network switches we cannot recommend using a hub. When you can pick up a perfectly good high-speed 8-port switch for $25 there’s no good reason to use an outdated hub on a home network—if you’re curious why a network admin would ever deploy a hub you can read about it here.
Returning to the topic of switches: switches are an excellent and inexpensive way to increase the size of your home network. If you outgrow the bank of four ports on the back of your router the simplest thing you can do to expand your network is to purchase a switch with an appropriate number of ports. Unplug the devices from your router, plug all the devices into the switch, and then plug the switch into the router. Note: switches have absolutely no routing functionality and cannot take the place of a router. Your router likely has a four-port switch built into it but that does not mean your new eight-port dedicated switch can replace your router—you still need the router to mediate between your modem and switch.
Now that you’ve got a clear picture of how exactly your network should be physically configured let’s talk about network speeds. There are two primary designations we are interested in: Ethernet and Wi-Fi. Let’s take a look at Ethernet first.
Ethernet connection speeds are designated in 10BASE. The original Ethernet protocol, now 30 years old, operated as a max speed of 10 Mbit/s. Fast Ethernet, introduced in 1995, upped the speed to 100 Mbit/s. Gigabit Ethernet was introduced shortly after that in 1998 but didn’t gain much traction in the consumer market until recently. As its name suggests, Gigabit Ethernet is capable of 1000 Mbit/s. You will commonly see these designations noted on networking gear and its packaging as 10/100 or 10/100/1000 indicating which Ethernet version the device is compatible with.
In order to take full advantage of the maximum speeds all the devices in the transfer chain need to be at or above the speed rating you want. For example, let’s say you have a media server in your basement with a Gigabit Ethernet card installed and a media console in your living room with a Gigabit Ethernet card but you are connecting the two together with a 10/100 switch. Both devices will be limited by the 100 Mbit/s ceiling on the switch. In this situation upgrading the switch would boost your network performance considerably.
Outside of transferring large files and streaming HD video content across your home network there is little need to go out and upgrade all your equipment to Gigabit. If your primary computer network usage involves browsing the web and light file transfers 10/100 is more than satisfactory.
Wi-Fi speeds are designated by letter, not by number. Unlike the easy to translate number-as-network-speed designation we find with Ethernet the Wi-Fi designations actually refer to the draft versions of the IEEE 802.11 networking standard that dictates the parameters of the Wi-Fi protocol.
802.11b was the first version widely adopted by consumers. 802.11b devices operate at a maximum transmission of 11 Mbit/s but the speed is highly dependent on signal strength and quality—realistically users should expect 1-5 Mbit/s. Devices using 802.11b suffer from interference from baby monitors, bluetooth devices, cordless phones, and other 2.4GHz band devices.
802.11g was the next major consumer upgrade and boosted the max transmission to 54 Mbit/s (realistically about 22 Mbit/s accounting for error correction and signal strength). 802.11g suffers from the same kind of 2.4GHz band interference that 802.11b does.
802.11n is a significant upgrade to the Wi-Fi standards—devices use multiple-input multiple-output antennas (MIMO) to operate on both the 2.4GHz and relatively empty 5GHz bands. 802.11n has a theoretical maximum of 300 Mbit/s but accounting for error correction and less than ideal conditions you can expect speeds in 100-150 Mbit/s range.
802.11ac is a huge upgrade that brings wider channels (80 or 160 MHz versus 40 MHz), more spatial streams (up to eight) and things like beamforming, which sorta send the waves directly to your device instead of bouncing all around, making things much faster. How much faster? There are some models that can do one gigabit per second. It’s extremely fast.
Like Ethernet, Wi-Fi speeds are limited by the weakest link in the direct network. If you have an 802.11n capable Wi-Fi router but your netbook only has an 802.11g capable Wi-Fi module you will max out at the 802.11g speeds. In addition to the speed limitations there is a very pressing reason for abandoning the oldest popular Wi-Fi protocol 802.11b. You must use the same level of encryption on every device in your network and the encryption schemes available to 802.11b devices are weak and have been compromised (WEP encryption, for example, can be compromised in a matter of minutes by a moderately skilled child). Upgrading your Wi-Fi router and wireless equipment allows you to upgrade your wireless encryption as well as enjoy faster speeds. If you haven’t done anything to secure your router now would be a good time to read our guide to locking down your Wi-Fi network against intrusion.
Also like Ethernet, upgrading to the maximum speed—in this case 802.11n—is best suited for people moving large files and streaming HD video. Upgrading to 802.11n will have a negligible impact on your web browsing speed but will have an enormous impact on your ability to wirelessly stream HD content around your home.
At this point you’ve got a handle on how your home network needs to be laid out and you have an understanding of what the network speed designations mean and how they impact you and your network. It’s time to upgrade your switch, roll out some new Wi-Fi bandwidth, and enjoy a better optimized home network.