Ever installed Linux on a laptop, rebooted, and found it can’t see your Wi-Fi card? It’s pretty deflating. Try these hints. One or more of them might just get it working.
Linux and Wi-Fi: It’s A Love-Hate Thing
Historically, Linux has had a somewhat strained relationship with Wi-Fi cards. In recent years, the situation has changed considerably—and for the better—but it is still possible to boot into your new Linux installation and get that sinking feeling when you realize you’ve got no Wi-Fi.
Installation routines are very good at identifying the various components of the target computer and configuring itself to work with that hardware. But problems can still happen.
Troubleshooting hardware issues is difficult, especially if the only computer you have on hand is the broken device. Obviously, not everything presented here will be applicable to all cases. But hopefully, something below will either fix your issue or point you in the right direction.
Before You Install
Do some research. Most distributions have listings of supported hardware. Ask on their forums whether anyone else is using the same make and model of laptop as you intend to use. Did they have any issues, and if so, how did they fix them?
To get a good idea of what you’ll be facing, boot your laptop from a Live USB or Live CD of the most recent release of your intended distribution. You can then make sure it works as you’d expect, without taking the leap of faith of installation.
Check things like the screen resolution and graphics, the mouse pad and gestures, and your Wi-Fi connection. If they work in the live environment they should work when you install the distribution. If any of these don’t work, try a Live CD from a different distribution. You might get different results. If that’s the case, can you identify why? Perhaps they use a more recent kernel, or they bundle the drivers with their installation.
Using the commands we show you in this article you can identify the Wi-Fi hardware inside your laptop. With that knowledge, you can do some web searches. If you’re lucky, your Wi-Fi card will be one that just works. If not, you’ll probably need to use some of the techniques we describe in this article.
Look up the key combination that you need to interrupt the boot sequence and enter the BIOS of the laptop. You might not need it, but if you do you’ll be glad you found it out in advance. It’s often one of the following: Esc, F2, F5, or F10. On a lot of laptops, you’ll need to hold down the “Fn” button at the same time. Make sure you know what the keys are to get into the BIOS on your laptop.
Plan on what you will do if the Wi-Fi doesn’t come up straight away. Can you use a wired connection to get your laptop onto the internet? If not do you have access to another computer? Can you tether to your cell phone and use that to access the internet?
Look for the Simple Gotchas
It’s easy to leap straight into the deep end and start investigating complex root causes, but don’t overlook the simple things.
Some laptops have physical external switches—usually sliders—that disable Wi-Fi. These are often well-camouflaged and designed to blend into the laptop’s bodywork. Accidentally sliding one of these to the “off” position will prevent the Wi-Fi from working no matter what you do in the operating system.
It’s also possible to disable Wi-Fi from the BIOS. Reboot your laptop and enter the BIOS. Find the networking or Wi-Fi section, and make sure Wi-Fi is enabled.
Let the boot sequence continue. Log in and open the system menu by clicking on the right-hand end of the GNOME status bar (or wherever network settings are located in your desktop environment). If there is a menu entry titled “Wi-Fi Off”, click it.
From the expanded menu options, select “Turn on”.
The menu will close. Re-open it, and select “Settings.”
In the Settings application, select Wi-Fi from the sidebar, and ensure that the slider in the top bar is “on” and the airplane mode slider is “off”. Then select a Wi-Fi network to connect to.
If you’re not seeing any of these options, your network card is not being recognized by the operating system.
Working Through the Issues
Now that we’re sure we’ve not missed any basic fixes, let’s get into the nitty-gritty of Wi-Fi card troubleshooting.
Is Any Type of Networking Operational?
If you have an ethernet connection on the laptop, and you can get a connection using a wired connection, then networking is operational on your laptop. It’s just the Wi-Fi that isn’t working. If you don’t have an Ethernet port, you may still have hope with an Ethernet adapter.
If you can’t get a connection through your wired connection, then there’s something wrong with the computer’s networking capability, period. Try to get your laptop to ping itself.
If neither of those work, your network manager might be missing or broken. Try re-installing it. This will either install it or replace it if it is already installed.
On Ubuntu type:
sudo apt install network-manager
On Fedora use:
sudo dnf install network-manager
On Manjaro, the command is:
sudo pacman -Sy network-manager
Reboot, and see if that improves the situation.
Identifying the Wi-Fi Card Hardware
If you’re still without Wi-Fi, we need to identify the Wi-Fi card hardware. The
lspci command will list all of your PCI devices.
Look for an entry with “wireless” or “wi-fi” in its description.
On this laptop, it’s a Realtek RTL8723BE. We can also see this information using the
nmcli command, including the network interface identifier.
Our wireless interface
wlan0 is showing as unavailable, but it still identifies the hardware for us.
This entry is showing as “software disabled” because we’ve turned the Wi-Fi card off to emulate a failure. In a real-world scenario, the message here might give you a clue to what the issue is or what it may be related to.
Trying To Bring the Card Online
iw command can sometimes prove useful. Substitute
wlan0 for the appropriate interface on your computer.
iw dev wlan0 link
We’re told the interface is not connected. Let’s try and bring it up.
sudo ip link set wlan0 up
We’re told the network connection cannot be brought up because of
rfkill . This is a utility to forcibly prevent radio frequency network interfaces from operating. We can get it to show us what it is blocking.
And we can tell it to unblock whatever is blocked. Note that if the card is listed hard blocked it means there is a physical switch on the laptop that needs to be set to the “on” position. Let’s remove the software block.
rfkill unblock wifi
In our case, this seems to have cured the issue. If your issue is still present, it’s likely to be a driver module issue.
Checking the Drivers
We can check the drivers in use using the
lspci command, with the
-k (kernel drivers) option.
Our wireless card is using the “rtl8723be” driver and kernel module.
We can check whether this is being loaded by searching the system logs using
grep . Substitute “rtl8723be” with the name of the module for your computer.
sudo dmesg | grep rtl8723be
If you don’t see a positive indication that the driver is loaded, check the website and online help for your distribution, and search for instructions on how to download drivers from your distribution. Distributions often have bundled packages of common drivers that you might be able to use, and they may well have distribution-specific applications to make loading new drivers simple.
If you can’t find a way to get your drivers from your distribution’s package manager or website, you can review the list of supported wireless cards, and find your card hardware in the list.
Clicking on the model—or closest match—of the Wi-Fi card takes you to a card-specific page. This page will list all of the cards in that family of hardware releases. See if your card is listed there.
In our case, we clicked on the “rtl8723ae” link, which gave us a page with the rtl8723be listed on it, too.
At the bottom of the page is a link under the “firmware” title.
This takes you to the git repository page for the firmware. Use the
git clone command and one of the locations listed at the bottom of the page to download the repository. We used:
git clone git://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git
In the (large) downloaded directory tree you should find the appropriate driver file for your hardware.
Refer to your distribution’s instructions on how best to load this.
Use Your Community
The communities associated with Linux distributions are one of the greatest strengths of Linux. Ask for help in the community of your chosen distribution. The chances are high that someone else has been through the same thing you’re battling with.
- › How to Install Arch Linux From a GUI
- › How to Set Up Bluetooth on Linux
- › The Best Wi-Fi Adapters of 2023
- › OverDrive, the Library eBook App, Is Shutting Down
- › How to Transfer Photos from Android to iPhone
- › The Tiny ASUS Chromebox 5 Is Now up for Pre-Order
- › No Plex App, No Problem: Using Plex as a DLNA/UPnP Server
- › Ubuntu 18.04 Support Is About to End, but Not for Everyone