File systems in Linux and Unix-like operating systems like macOS can be mounted, unmounted, and remounted using the terminal. This is a powerful and versatile tool—here’s everything you need to know.
The Linux File System
The file systems in Linux, macOS, and other Unix-like operating systems don’t use separate volume identifiers for storage devices in the way that, say, Windows does. Windows assigns each volume a drive letter such as C: or D: and the file system for each volume is a tree of directories sitting below that drive letter.
In Linux, the file system is an all-in-one directory tree. A mounted storage device has its file system grafted onto that tree so that it appears to be an integral part of one cohesive file system. The newly mounted file system will be accessible via the directory to which it is mounted. That directory is called the mount point for that file system.
Many file systems are auto-mounted at boot time or on-the-fly as storage volumes connected to the computer during runtime. Cautious system admins can turn off the runtime auto-mount features so that they can control connections to the system.
This means storage devices connected during runtime might not auto-mount and will require mounting manually. Mounting a file system manually lets you make decisions about that file system, such as where the mount point will be and whether the file system is going to be read-only or read-write.
Whether it is out of necessity or through choice, the
remount commands give you the ability to take control of this important aspect of your Linux system.
Interrogate Your File System With mount
Mount has a great many options, but to list all of the mounted file systems on your computer requires no options at all. Simply type
mount and hit Enter:
mount will list all of the connected file systems in the terminal window.
It can be difficult to pick through that dump of data to find what you are looking for.
You can refine the output by asking
mount to list only the file systems of interest to you. The
-t (type) option tells
mount what type of file system to report on.
mount -t tmpfs
mount -t ext4
As an example, we have asked
mount to list only
tmpfs file systems. We get a much more manageable output.
tmpfs file system appears as though it were a regular, mounted file system but it is actually stored in volatile memory—the tmp stands for temporary—instead of on a persistent storage device.
You’ll want to substitute the
tmpfs parameter for the file type in which you are interested.
We’ve also issued a command to list
ext4 file systems. On this test computer, there is a single
ext4 file system, it is on device
sda—the first storage device mounted, usually the main hard drive—and mounted on
/, which is the root of the file system tree.
The other indicators mean:
- rw: The file system is readable and writable.
- relatime: The kernel is using an optimized scheme to record file access and modification meta-data.
- errors=remount -o: If a sufficiently serious error is detected, the file system will be remounted in read-only mode to allow diagnosis.
Interrogate Your File System With df
df command can also be used to display which file systems are mounted and where their mount points are.
df used with no parameters gives you the same information overload problem as
mount. As an example, in Ubuntu Linux, there is a
squashfs pseudo-file system created for each and every application that has been installed using the
snap command. Who wants to see all of those?
df to ignore them—or any other file system type— use the
-x (exclude) option:
df -x squashfs
You can easily see the names of the file systems, their capacities, used and free space, and their mount points.
Remounting All File Systems in fstab
All of the file systems mounted at boot time have entries in a file called
fstab, which is the file system table located within
You can use
mount to force a “refresh” and remount all the file systems listed in
fstab. Under normal operating conditions this is not required. It really comes into its own if you have issues with multiple file systems.
You’ll need to use
sudo, so you’ll be prompted for your password.
sudo mount -a
Admittedly, on a correctly operating computer, it is a little underwhelming.
On a computer with file system issues, however, the remount might clear the problems. If that doesn’t happen, then at least you will get diagnostic messages on the screen and in the system logs that will guide you to seek out the cause of the problem.
Mounting an ISO Image
It is easy to mount an ISO image so that you can access its contents as part of the file system.
This will work with any ISO image. In this example, we happen to be using a Tiny Core Linux ISO because it is conveniently small and quick to download. (A tiny Linux distribution with a GUI, in 18 MB! You probably have .mp3 files bigger than that.)
In the same directory as the ISO image, issue this command. Substitute the name of the ISO file that you are mounting.
sudo mount -t iso9660 -o loop TinyCore-current.iso /mnt
Because we need to use
sudo you’ll need to enter your password.
-t (type) option tells
mount what type of file system we are mounting. It is an ISO file, so we provide the
iso9660 type specifier.
-o (options) flag is used to pass extra parameters to
mount. Our parameter is
loop to force
mount to use a loop device file to connect to our ISO image. A loop device file allows a file (like the ISO image) to be mounted and treated as though it were a storage device.
Device files are special files used as an interface so that connected devices appear as though they were a normal file system file. This is part of the everything in Linux is a file design philosophy.
There are many different types of device files. We saw one earlier when we noted that the only
ext4 file system on this test machine was mounted on
/ and was called
To be more accurate, that
ext4 file system is on a storage device connected to the file system through the
/dev/sda device file and the file system on that storage device mounted at
We have to provide the name of the ISO image of course, and we need to let
mount know where we’d like the file system to be mounted. We have chosen
The ISO image is mounted. A reminder that ISO images are always mounted in read-only mode appears in the terminal window.
Exploring the ISO Image
Now that it is mounted we can navigate the directories in the ISO image in the same way as any other part of the file system. Let’s list the files in the ISO image. It is mounted at
Unmounting the ISO Image
To unmount a mounted file system, use the
umount command. Note that there is no “n” between the “u” and the “m”—the command is
umount and not “unmount.”
You must tell
umount which file system you are unmounting. Do so by providing the file system’s mount point.
sudo umount /mnt
No news is good news. If there’s nothing to report, then all went well.
Creating a Mount Point
You can create and use your own mount points. We’re going to create one called
isomnt and mount our ISO image on that. A mount point is just a directory. So we can use
mkdir to create our new mount point.
sudo mkdir /media/dave/isomnt
Now we can use the same command format as before to mount our ISO image. This time we won’t mount it on
/mnt, we’ll mount it on
sudo mount -r -t iso9660 -o loop TinyCore-current.iso /media/dave/isomnt/
We can now access the mounted file system from our new mount point.
But those pathways are getting very long. That’s quickly going to become tiresome. Let’s do something about that.
Binding a Mount Point
You can bind a mount point to another directory. The mounted file system can then be accessed either through the original mount point or through the directory that is bound to it.
Here’s a worked example. We’ll create a directory in our home directory called
iso. Then we’ll bind the mount point of the ISO image
/media/dave/isomnt to the new
iso directory in our home directory.
We’ll be able to access the ISO image through the original mount point
/media/dave/isomnt and through the new
iso directory. The
-B (bind) option requires the name of the mount point and the name of the directory to bind it to.
sudo mount -B /media/dave/isomnt/ iso
Using umount With Binds
A file system that has had its mount point bound to another directory requires unmounting from its mount point and the bind point.
Even if we unmount the file system from its original mount point, you can still access the file system from its bound directory. The file system must be unmounted from that directory also.
sudo umount /media/dave/isomnt
sudo umount iso
Mounting a Floppy Disk
A floppy drive (with a floppy disk in it) is a storage device. That means an sd (for storage device) device file will be used to connect to the physical device. We must establish which is the next free sd device file. We can do this by piping the output of
grep and looking for entries with “sd” in them.
df | grep /dev/sd
On this computer, there is a single sd device file in use. This is
/dev/sda. The next sd device file issued will be
/dev/sdb. That means when we connect the floppy drive to the computer, Linux will use
/dev/sdb to connect to the floppy drive.
We will tell
mount to mount the file system on the floppy disk in the floppy drive that is connected to
/dev/sdb to the
/mnt mount point.
Insert the floppy disk into the floppy drive and connect the floppy drive to a USB port on the computer. Issue the following command:
sudo mount /dev/sdb /mnt
File System Labels
We can use the
-l (label) option with
mount to find out what, if any, label is attached to a file system. Labels are no more than arbitrary names. They have no functional purpose.
We’re using the
-t (type) option to ask
mount to report on
vfat file systems only.
mount -l -t vfat
You’ll find the label in square brackets at the end of the listing. The label for this floppy drive is NORTUN.
We can access the floppy drive through the
/mnt mount point.
ls -l AMATCH.C
The floppy contains C language source code files. The date stamp of one file shows it was last modified on October 1992. It is probably older than a lot of our readers. (Needless to say the meaning of NORTUN as a label is lost in the mists of time.)
If we repeat our
df piped through
grep command to list sd device files, we’ll see that there are now two of them.
df | grep /dev/sd
Our floppy drive is showing as mounted on
/dev/sdb as we expected. The file system on the floppy disk in the drive is mounted at
To unmount the floppy we use
umount and pass it the device file as a parameter.
sudo umount /dev/sdb
The umount Lazy Option
What happens if you (or another user) are using the file system when you try to unmount it? The unmount will fail.
sudo umount /dev/sdb
It failed because the current working directory of the user is within the file system he is trying to unmount. Linux is smart enough not to let you saw off the branch you’re sitting on.
To overcome this use the
-l (lazy) option. This causes
umount to wait until the file system is able to be safely unmounted.
sudo umount -l /dev/sdb
Even though the
umount command is issued, the file system is still mounted, and the user can list the files as normal.
As soon as the user changes directory to their home directory, the floppy file system is released and is unmounted. Trying to list the files in
/mnt produces no results.
Mounting a Samba Share
Samba is a set of software services that allow network shares to be accessed interchangeably between Linux and Unix-like operating systems, and Windows operating systems.
Setting up Samba is beyond the scope of this article. But, if you have authorized access to a Samba share that has been made available to you, this is how you can mount it in Linux.
A Raspberry Pi connected to the same network as the test machine has a Samba share on it. It is a directory called Backup that has given the Samba name of “share.” Let’s make an SSH connection to it and look at the contents of the shared directory. The shared directory is on a USB stick mounted on the Pi.
The username is
pi and the network name of the Raspberry Pi is
The user issues the
SSH command and is prompted for their Raspberry Pi password.
They provide their password and are authenticated. The terminal window prompt changes to
pi@marineville because it’s connected to the Raspberry Pi.
They list the contents of the shared directory at
/media/pi/USB64/Backup . The contents are two directories, one called
dave and one called
pat. So now we know what to expect when we mount the Samba share.
exit to disconnect from the Raspberry Pi and the prompt changes back to
To use Samba, you must install the
apt-get to install this package onto your system if you’re using Ubuntu or another Debian-based distribution. On other Linux distributions, use your Linux distribution’s package management tool instead.
sudo apt-get install cifs-utils
When the installation has completed, mount the share with a command like the following, changing the IP address, share name and mount point (which must already exist) to suit your circumstances.
sudo mount -t cifs -o credentials=/etc/samba/creds,uid=1000,gid=1000 //192.168.4.13/share /media/dave/NAS
Let’s break down the parts of that command.
- -t cifs: The file system type is cifs.
- -o credentials=/etc/samba/creds,uid=1000,gid=1000: The options parameters are the path to a file called
credsthat is secured and contains the user name and password for the Raspberry Pi user; the User ID (UID) and Group ID (GID) that are used to set the owner and group of the root of the file system.
- //192.168.4.13/share: The network location of the device with the Samba share on it, and the Samba name of the shared directory. The root of the share is a directory called
Backup, but its Samba share name is set to
- /media/dave/NAS: The name of the mount point. You must create your mount point in advance.
By accessing our mount point at
/media/dave/NAS we are accessing the shared directory on the Raspberry Pi across the network. We can see the two folders on the Raspberry Pi called
Creating and Mounting a File System
You can use the
dd command to create an image file, then use
mkfs to create a file system inside it. That file system can then be mounted. This is a good way to practice and experiment with
We use the
if (input file) option to tell
dd to use the stream of zero values from
/dev/zero as the input file.
of (output file) is a new file called
We’re using the
bs (block size) option to request a block size of 1 MB.
We use the
count option to tell
dd to include 20 blocks in the output file.
dd if=/dev/zero of./geek_fs bs=1M count=20
That creates our image file for us. It contains nothing but zero values.
We can create a working file system inside the
geek_fs file using the
mkfs command. The
-t (type) option allows us to select the file system type. We’re creating an
mkfs -t ext4 ./geek_fs
That’s all it takes to have a working file system.
Let’s mount it on
/media/dave/geek and then use
chown to set the owner and group ownerships to allow access to it.
sudo mount ./geek_fs /media/dave/geek
sudo chown dave:users /media/dave/geek
Does it work? Let’s change into the new file system and copy in a file to see.
cp /etc/fstab .
We were able to change directory into the new file system, and we successfully made a copy of the
/etc/fstab file. It’s working!
If we use
mount to list the mounted file systems but restrict its output to
ext4 file systems using the
-t (type) option, we’ll see that there are now two mounted
ext4 file systems.
mount -t ext4
Remounting a File System
Remounting a file system uses the
-o remount option. It is typically done to change a file system from a read-only (testing) state to a read-write (production) state.
Let’s mount our floppy drive again. This time we’ll use the
-r (read-only) flag. Then we’ll pipe
grep and look at the details of the floppy file system.
sudo mount -r /dev/sdb /mnt
mount | grep /mnt
As you can see the highlighted
ro indicates the file system is mounted read-only.
-o remount option with the
rw (read-write) flag we can unmount and remount the file system with the new settings, all in one command.
sudo mount -o remount,rw /mnt
Repeating the piping of
grep shows us that the
ro has been replaced by
rw (highlighted). The file system is now in read-write mode.
mount | grep /mnt
(Not) Moving a File System
You used to be able to unmount a file system and remount it on another mount point with a single command.
-M (move) option in
mount exists specifically to allow you to do that. But it no longer works in Linux distributions that have moved over to
systemd. And that’s most of the big names.
If we try to move a file system from
./geek, it fails and gives the error message shown below. Trying to list the files in the files ystem through
./geek returns no results.
sudo mount -M /mnt ./geek
The workaround is to use the
-B (bind) option that we used earlier to bind the original mount point to the new mount point.
sudo mount -B /mnt ./geek
Apart from not freeing up the original mount point, this will have the same practical outcome.
--make-private option it was possible to force the move to take place on
systemd versions of Linux. That technique is not presented here for two reasons.
- It may have unpredictable behavior.
- It was not persistent and would need to repeat at each reboot.
Apart from the
systemd issues with the
-M (move) option, you should find the use of
umount straightforward. These are great commands to have up your sleeve when faced with a damaged system, and you have to start piecing the file system back together by hand.
|Files||tar · pv · cat · tac · chmod · grep · diff · sed · ar · man · pushd · popd · fsck · testdisk · seq · fd · pandoc · cd · $PATH · awk · join · jq · fold · uniq · journalctl · tail · stat · ls · fstab · echo · less · chgrp · chown · rev · look · strings · type · rename · zip · unzip · mount · umount · install · fdisk · mkfs · rm · rmdir · rsync · df · gpg · vi · nano · mkdir · du · ln · patch · convert · rclone · shred · srm|
|Processes||alias · screen · top · nice · renice · progress · strace · systemd · tmux · chsh · history · at · batch · free · which · dmesg · chfn · usermod · ps · chroot · xargs · tty · pinky · lsof · vmstat · timeout · wall · yes · kill · sleep · sudo · su · time · groupadd · usermod · groups · lshw · shutdown · reboot · halt · poweroff · passwd · lscpu · crontab · date · bg · fg|
|Networking||netstat · ping · traceroute · ip · ss · whois · fail2ban · bmon · dig · finger · nmap · ftp · curl · wget · who · whoami · w · iptables · ssh-keygen · ufw|
- › Why Does Windows Still Use Letters for Drives?
- › How to Use the mkfs Command on Linux
- › How to Use the fsck Command on Linux
- › How to Migrate Ext2 or Ext3 File Systems to Ext4 on Linux
- › How to Write an fstab File on Linux
- › How to Move Your Linux home Directory to Another Drive
- › 8 Cybersecurity Tips to Stay Protected in 2022
- › Do You Still Need a VPN for Public Wi-Fi?