Do you ever plug in your wired network card while your wireless card is still enabled? Ever wonder how Windows chooses which one to use? Here’s how to see the default priority—and how to change it if you want.
Note: there’s almost never any reason to change this, as Windows does a good job of choosing the right connection. Still, if you want to tweak it to work differently, this is how you would do it.
How to See the Current Network Card Priority
You’ll need to open up a new command prompt window and type in the following command:
netstat -rn | more
The | more part of the command will make sure that it doesn’t go flying off the screen, requiring you to scroll backwards—speaking of which, you should read our article about how to scroll backwards in the command prompt with the keyboard.
At the top of the output you’ll see the Interface List, and the column on the left-hand side shows the metric of the interface. You’ll notice that the loopback interface has the highest priority, followed by my wired Gigabit card, and then my wireless card.
If you’re wondering what all the other cards in the list are about, I’ve got some VPN software loaded, as well as VMware Workstation, all of which create virtual adapters that show up in the list.
How to Change the Network Card Priority
To change the priority, head into Network and Sharing Center and click on the Change adapter settings link on the left-hand side—or you can quickly open the network connections list by typing ncpa.cpl into the Start Menu search box.
Now that we’re in here, choose the network card that you want to change the priority for, right-click it, and choose Properties from the menu.
Now select the Internet Protocol Version 4 item in the list, and click the Properties button.
Now click the Advanced button at the bottom of this window…. getting tired of clicking yet?
And now, finally, we’re at the place where you can make the change. Uncheck the box for Automatic Metric, and then type a number into the Interface Metric textbox. You can consult the list that we found in the command prompt earlier to know what metric to assign—you’ll probably want to assign it something higher than 1, since that’s used for the loopback adapter.
You may want to go ahead and change the priority for your other card as well, just to be sure that it is assigned the proper priority.
Note: again, there’s no reason to mess with this setting unless you are actually having a problem. Also, thanks to @rawmeet for the idea for this article.
- › The Best Wi-Fi Articles for Securing Your Network and Optimizing Your Router
- › The 50 Best How-To Geek Windows Articles of 2010
- › Stop Using Your Phone For Sleep Sounds
- › How to Play Xbox Games on Your PC
- › How to Find Your Apple Music Replay
- › How to Watch UFC 286 Edwards vs. Usman Live Online
- › How to Fix the Windows 0xc00000e5 Error
- › Windows 11 Will Give You More Control Over Default Apps