On Windows, launch Notepad (or another text editor) as Administrator. Open the hosts file, which is located under C:\Windows\System32\drivers\etc. On Mac and Linux, edit the /etc/hosts file using your text editor as choice---be sure to launch the editor with sudo.

Occasionally you may need to edit the hosts file on your machine. Your host file might have been edited maliciously in an attack, or as a prank. Alternatively, you may just want to control access to certain websites or control network traffic.

Computers have had hosts files since the ARPANET days. The hosts files were used to resolve host names for decades before the DNS system was implemented. Since they were used to aide in network name resolution, hosts files grew to become massive documents.

Microsoft, Apple, and other operating system developers have kept the hosts file around, which is why it varies very little between Windows, macOS, and Linux. The syntax stays mostly the same across all platforms. Most hosts files will have several entries for loopback. We can use that for the basic example for the typical syntax.

The first part will be the location to redirect the address to, the second part will be the address that you will want to redirect, and the third part is the comment. They can be separated by a space, but for ease of reading are typically separated by one or two tabs, or the equivalent amount of spaces. localhosts #loopback

Now let’s look at accessing the hosts files in different operating systems.

Editing the Hosts File on Windows 10 or Windows 11

The hosts file is still present in the latest and greatest from Microsoft — Windows 10 and Windows 11 — despite being ancient by computer standards. It isn’t used much in in modern Windows networking, however.

The hosts file, like other files that can be found in the Windows folder, is protected. You need administrative privileges to move, edit, or delete the file.

RELATED: How to Edit the hosts File on Windows 10 or 11

You can use any plain text editor you want to modify the hosts file, however Notepad is perfectly adequate for the task. You don’t need to go download another one just for this job.

Hit the Start button, type “notepad” into the search, and then right-click it and hit “Run as Administrator.”

Click on “File” in the top left corner, hit “Open,” and then navigate to:


Make sure to change the select to “All Files (*.*)” rather than “Text Documents (*.txt).” The hosts file doesn’t have a file extension, so it won’t show up if you’re only displaying text documents. After you change that setting, locate the “hosts” fileand click open.

Open the hosts file with Notepad. Make sure to change it to "All Files."

You can then edit the hosts file however you’d like. There are a few obvious things to do with it, like block or reroute internet traffic.

RELATED: How to Use Your Computer's Hosts File to Block Tons of Malware, Porn, and Other Types of Websites

Editing the Hosts File on Windows 8 or 8.1

Editing the hosts file on Windows 8 and 8.1 is basically the same as Windows 10 or 11.

Just search for Notepad, right-click on Notepad in the search results list, and then choose  “Run as Administrator.

Once you’ve opened Notepad, click “File” in the top right, click “Open,” and then navigate to the /etc/ folder:


You’ll be able to edit the hosts file like you would any other file. You can use it to block access to websites, if you want.

Tip: If you get an error notifying you that you don’t have permission, you didn’t actually run Notepad as administrator.

Windows 7

Accessing the hosts file in Windows 7 is the same as on newer versions of Windows. You need to run Notepad as administrator, navigate to the hosts file, and then open it up.

There are a few ways you can do this. The first is to find Notepad, right-click it, hit “Run as Administrator,” and then navigate to the hosts file. It is located at:


Alternatively, you can hit Windows+R to open up a Run window, and then enter the following command:

notepad c:\windows\system32\drivers\etc\hosts

The command will run Notepad as administrator and automatically open the specified file.

Once notepad is open you can edit the file. In this example we will block Facebook. To do this just enter in the following after the # mark.    www.facebook.com
Note: You can also use the loopback address instead of, but that is basically up to personal preference.

Now that you have edited your Hosts file make sure to save it.

Now notice if we try to access Facebook in IE we can’t get to the page.

We also were not able to get to it in Google Chrome… (check notes at the end). Also for more info on editing your Hosts file, check out The Geek’s article on how to create a shortcut to quickly edit your Hosts file.

Edit The Hosts File On Ubuntu

In Ubuntu (and most Linux distributions) you can edit the hosts file directly in the Terminal. You can use your favorite command-line editor or your favorite GUI text editor. For this example we will use Vim, since it is one of the traditional text editors in Linux. Like Windows, Ubuntu’s hosts file is located in the /etc/ folder, though here it is in the root of the drive. The hosts file is protected, and your regular user account will not be able to edit it.

RELATED: Define a Great Vim Profile Using .vimrc

You’ll need to launch Vim prefaced by sudo, which is conceptually and functionally similar to “Run as Administrator” on Windows operating systems. Open up a Terminal, then enter:

sudo vim /etc/hosts

You’ll need to enter your password before the command will execute.

RELATED: How to Control sudo Access on Linux

Note: If you get a message notifying you that Vim is not installed, just run “sudo apt install vim” in a Terminal.

Run "sudo vim \etc\hosts" in a Terminal.

Now that it is open we can edit it to redirect Facebook into nothing. You will notice that with Ubuntu there is also a section for IPv6.

You can ignore the IPv6 section in most cases; just editing the IPv4 section should do what you need.

An entry in the hosts file that will block Facebook.

Now we can save the file and try to go to Facebook.com. When you set the address in the hosts file to, your computer can’t reach Facebook, and throws an error: “Unable to Connect.”

The browser cannot connect to Facebook.com.

Note: If your browser has been configured to use DNS Over HTTPS and its own DNS Server, editing the hosts file will probably not block access.

RELATED: How to Set DNS Search Order in Ubuntu 18.04 using NetPlan

Change the Hosts File on Any macOS Version

In macOS, accessing the hosts file is very similar to Ubuntu. Begin in terminal and use your favorite editor — it could even be a GUI-based text editor if you wish, but it is easier to use a command-line editor from the Terminal.

Running Vim as Sudo is the only way to access the hosts file. You'll be prompted for a password.

The file will look a lot like the hosts file found in Windows and Linux. Again we are going to redirect Facebook to

The MacOS hosts file.

Safari, just like a browser on Windows and Ubuntu, will be unable to connect to Facebook.

Safari's connection to Facebook was blocked.

Why Isn’t The Hosts File Blocking Connections?

All of the major modern browsers offer DNS Over HTTPS (DOH). DOH encrypts your DNS requests so that they can’t be intercepted and read by third parties that might be snooping — in general, this is a great thing.

RELATED: How DNS Over HTTPS (DoH) Will Boost Privacy Online

For our purposes here, it limits the utility of the hosts file. The hosts file can only be used to block internet traffic if your browser is deferring to the DNS Server specified in the Windows operating system. A lot of browsers will enable DNS Over HTTPS automatically and use their own DNS servers. That results in the browser completely bypassing the hosts file. It is possible to force your browser to use the DNS Server Windows specifies, but you’ll have to dig through your browser’s settings.

This should get you started in understanding the Hosts file and how it can help protect your computer. Under the right circumstances, you can use it to block sites that you don’t want a PC to be able to access.

RELATED: Stupid Geek Tricks: Create a Shortcut to Quickly Edit Your Hosts File

Profile Photo for Nick Lewis Nick Lewis
Nick Lewis is a staff writer for How-To Geek. He has been using computers for 20 years --- tinkering with everything from the UI to the Windows registry to device firmware. Before How-To Geek, he used Python and C++ as a freelance programmer. In college, Nick made extensive use of Fortran while pursuing a physics degree.
Read Full Bio »