Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites.
SuperUser reader Yoosiba wanted to know if hard drive orientation matters:
I’ve noticed on many small PC cases that the hard drives are installed vertically. In midi cases, towers and others of a larger housing, they are in the horizontal position.
What impact on a hard drive does a vertical position have? Does it affect the life? Is it more prone to errors?
(Not SSDs (solid-state drive), just plain hard drive with all its mechanical parts inside.)
What change in longevity, if any, does the orientation produce? Let’s dig into the responses to see.
Several SuperUser contributors offered their input; Hyperslug writes:
According to several manufacturers, mounting a 3/5″ hard drive horizontally, vertically, or sideways doesn’t affect the hard drive life significantly.
These are statements taken from the hard drive literature at each manufacturer’s website; it’s four years old but things probably haven’t changed much.
The drive will operate in all axes (6 directions). Performance and error rate will stay within specification limits if the drive is operated in the other orientations from which it was formatted.
Physical mounting of the drive: WD drives will function normally whether they are mounted sideways or upside down (any X, Y, Z orientation).
The hard drive can be mounted in any orientation.
As long as it is securely attached to the chassis, hard disk drives may be mounted either horizontally or vertically depending on how your computer’s case is constructed.
When asked if the drive could be mounted at askew angles, their official positions were:Manufacturer Contact method Response ------- --------------------- --------------------- WD Tech support, email 90 degrees. Hitachi Hitachi documentation 90 degrees. Samsung Tech support, phone 90 degrees. Fujitsu Tech support, chat 90 degrees +-5. Seagate Tech support, email 90 degrees preferred, but diagonal OK. Maxtor Tech support, phone 90 degrees preferred, but in real world, whatever.
By 90 degrees, they mean vertical, horizontal, or sideways.
A Dwarf threw out a cooling consideration:
It shouldn’t matter which way you do it these days. But there’s one possible caveat of making it vertical:
Under situations where cooling is at premium and you don’t have the means to increase cooling of your system, mounting the disk horizontally with the label facing upwards could be seen as an advantage, since heat rises away from the disk surface more efficiently than if the disk was mounted vertically. But even so, any impact on performance or disk lifetime would only be noticeable in years to come. Just thought nevertheless to make this note.
Finally, Chris Nava notes that historically there was a precedent for maintaining the orientation the drive was formatted in:
At one time (long ago) manufactures advised against changing the orientation of a drive without reformatting it. This was due to the heads being affected by gravity and becoming misaligned with respect to the data. I have not seen such a notice in quite some time.
The bottom line: as long as the drive stays safely mounted in the case and properly cooled there is little concern for excessive wear.