If you are still using Windows XP and are jealous of the Če še vedno uporabljate Windows XP in so ljubosumni optional but really useful checkboxes feature in Vista neobvezna polja pa pošteno koristen zunanja oblika v razgled , or the full row selection in details mode, there's a new solution for you that one of our readers wrote in about yesterday. , Ali polne izbire vrstico v načinu podrobnosti, obstaja novo rešitev za vas, da je eden od naših bralcev je napisal v približno včeraj.

The solution comes in the form of a small executable application requiring the .NET 3.5 framework, and weighing in at about 13mb of memory usage in my testing, which plugs into Explorer and adds full row selection and checkboxes, although the checkboxes are a little odd (more below on that). Rešitev prihaja v obliki majhnih izvršljiv vloge, ki zahteva. NET 3,5 okvir in tehta približno 13MB od spomin navada v moji testiranja, ki ga priključite v Explorer in dodaja, celotno vrsto za izbor in potrditvena polja, polja, čeprav so malo čudno (več o tem v nadaljevanju).

I'm not sure that I'd keep it running all the time… I'd probably just turn it on whenever I needed to use checkboxes to more easily select a bunch of files, and then turn it off when I was done. (Actually I'd just upgrade to Vista, but that's beside the point) Nisem prepričan, da sem ga hranite teče ves čas ... Verjetno sem samo vklopite kadarkoli sem potrebno za uporabo polja za lažje izbrati kup datotek, nato pa jo izklopite, ko je bila sem naredil. ( Pravzaprav bi jaz šele vzpenjajoč se razgled, toda to je poleg točke)

Using TrayProdder Uporaba TrayProdder

The application is simple, contained in a single executable file that doesn't require installation. Uporaba je preprosta, v eno samo izvedljivo datoteko, ki ne potrebuje namestitve. Just save it somewhere useful, and then once you launch the application you'll see a new icon sitting in the system tray. Samo shranite nekje koristno, in potem, ko zaženete aplikacijo, ki jo boste videli novo ikono sedel v sistem pladenj.

The application window has a bunch of buttons, most of which you can ignore at first, since you'll want to check the two boxes for “Checkboxes” and “Full row select”, depending on which ones you want to use. Uporaba okna je kup gumbov, od katerih večina vas more prezreti na prvi, saj boste želeli preveriti dve polji za "čekovna knjižica" in "Full vrstici izberite", odvisno od tiste, ki jih želite uporabiti.

This will give you a new checkbox column, and you'll notice that when you click on a file or folder it selects the whole row (best used in Details view). To vam bo dala nov stolpec polje, in boste opazili, da ko kliknete na datoteko ali mapo, jo izbere celotno vrstico (uporabno pri Details view).

The checkboxes are a little strange though… once you check the boxes you need to use the “Select all checked” button to actually check them… Polja so malo čudno, čeprav ... ko si enkrat preverite polja morate uporabiti "Izberite vse preveriti" gumb, da dejansko njihovo preverjanje ...

And then you'll notice that those two checkboxes from above are now selected, and you can use regular Windows file functions on them (like copy or move). In potem boste opazili, da sta ta dva polja od zgoraj, so sedaj izbrali, in jih lahko uporabite reden Windows file funkcije na njih (kot kopirati ali premakniti).

Since you'll really want to use Details view if you are using this application, you might want to open up Tools \ Folder Options and choose “Apply to All Folders” to apply the details view across the board. Ker boste res želite uporabiti Podrobnosti pogled, če uporabljate to aplikacijo, boste morda želeli odpreti Tools \ Folder Options in izberite "Uporabi za vse mape", da se podrobnosti pogled čez krov.

If you don't like the details view, well I'm not really sure this utility is for you in the first place. Če vam ni všeč pogled podrobnosti, tudi nisem povsem prepričan, je to korist za vas na prvem mestu.

Set TrayProdder to Run at Startup Nastavi TrayProdder teči ob zagonu

If you want the application to run at startup, you'll need to create a shortcut, and you'll probably want to use one of the command line parameters in the shortcut, since the options don't save anywhere. Če želite vlogo naj se zaženejo ob zagonu, boste morali ustvariti bližnjico, in boste verjetno želeli uporabiti enega od parametrov ukazne vrstice v bližnjico, saj možnosti ne shrani nikamor.

-f = fullrowselect on (default: off) -f = fullrowselect na (default: off)
-c = checkboxes on (default: off) -c = polja na (default: off)
-h = hide main form at start (default: show form at start) -h = hide glavni obrazec na začetku (default: show obrazec na začetku)
-x = minimize to system tray at Close (default: ask whether to quit) -x = skrajnost zmanjšati v sistem pladenj na Close (default: vprašati, ali se zapre)

For instance, if you wanted to make the application start hidden with both features enabled, and minimize to the tray, you'd use something similar to this: Na primer, če si hotel, da bi začetek uporabe skriti z obeh funkcij omogočeno, ter do skrajnost zmanjšati v pladenj, bi lahko uporabite nekaj podobnega temu:

trayprodder.exe -f -c -h -x trayprodder.exe-f-c-h-x

Open up an explorer window and type in shell:startup into the address bar, and then create a shortcut to the TrayProdder executable in this folder. Odpri raziskovalec okno in tip v lupini: začetek v naslovno vrstico, in nato ustvarite bližnjico do TrayProdder izvršljiv v tej mapi.

Open up the properties, and add the parameters from above so that it looks similar to this: Odprite lastnosti, in dodate parametre od zgoraj tako, da izgleda podobno temu:

The first time you run the shortcut you'll be prompted with a security warning, which you can remove by unchecking “Always ask before opening this file”. Prvič zaženete bližnjico, ki jo boste morali z varnostno opozorilo, ki ga lahko odstranite z počistite "Vedno vprašaj pred odpiranjem te datoteke."

This will cause the application to load up every time you login to your computer. To bo povzročilo zahtevek za nalaganje gor vsakič, ko se prijavite v svoj računalnik.

Download TrayProdder from everator.com Download TrayProdder iz everator.com