Prenumerera till Hur-Till Geek

Important! This is an automatic machine translated page. If you can read english, you should Click Here to read the original English version of the article.

Knipan för VLC som hoppar over och kommer på efterkälken leka Kick-Defvideoen, sparar

VLC är massmedia för konungen allra… som den leker nästan något på någon plattform, några tajmar, några förlägger. Det är stort. Sent emellertid, har jag haft utfärdar med VLC som hoppar over när som helst I-förmiddagen som leker kick-defmassmedia som strömmer över en knyta kontakt.

Fixa komma på efterkälken och överhoppet

Om spara, som hoppar over, leker från ett hårt drev för lokal, välj ”alla” inställningarna som är längst ner av dialogen för att visa alla av alternativ, då navigera att mata in/Codecs -> Ta fram enheter -> Spara.

Cachingen värderar är här fastställd i millisekunder, så ställa in värdera till ska 1000 fungera som buffert för 1 understöder (standarden är 600, eller 0.6 understöder). Problemet med att ställa in detta alternativ för stort är att, om du önskar manuellt att hoppa over till ett nytt, peka i spara, det som ska, finns större fängelsekundstunder som det nöjt fungera som buffert igen.

VLC sparar matar in

Om spara som du är pröva att leka, lokaliseras på en knyta kontaktaktie, dig kan navigera att mata in/Codecs -> Ta fram enheter -> SMB och ändrar cachingen värderar här.

För illustration har jag visat att värderauppsättningen till 1 understöder, men denna inställning kan vara van vid fungera som buffert så mycket, som du önskar… en cache av 20 understöder skulle antagligen avlägsnar överhoppet även över radion knyter kontakt.

Caching för VLC SMB

Det nästa tinget som du kan göra, är att justera ett alternativ som gör en enorm skillnad, när det handlar med kick-defmassmedia över en långsam inmatnings-/utmatningsanslutnings… bläddrande, besegrar att mata in/Codecs -> Andra codecs -> FFmpeg.

Ändra ”överhoppet som kretsa filtrerar alternativet för för avkodning H.264” till alla. Detta alternativ gör playbacksmootheren vid litet förnedra det kvalitets- av föreställa. Dig kan försök de andra inställningarna först och endast använda detta som en räddningsplanka.

FFmpeg audio/video decoder

The last setting, although arguably the most important one, is to test using a different video output module. Using the DirectX 3D video output should offload some of the processing onto the video card, but you can test OpenGL or GDI to see if it helps.

It should be noted that at least on my system, Direct3D is the default anyway.

VLC Output modules

Hopefully at least one of these tips will solve your buffering problems.

If you haven’t used VLC, you should head to their download page and check it out.

| More
This article was originally written on 05/5/09 Tagged with: Geek Stuff, Vista Tips & Tweaks, Windows, Windows Vista

Daily Email Updates

You can get our how-to articles in your inbox each day for free. Just enter your name and email below:


Name:
Email:

Comments (11)

  1. CypherBit

    Can you perhaps offer any sugesstions as far as caching if the file being streamed is an IPTV channel which I’m streaming from one machine over to another through WiFi?

  2. gunn0r

    Nice tips, although I like SMPlayer more (http://smplayer.sourceforge.net/).

  3. thesun

    now i use media player classic with the k-lite codec pack
    so much better than vlc and also plays .mkv’s in 720p and 1080p properly without lagging

  4. Jim

    I just went to do this and mine was defaulted to 300, not 600. It had to be the default because I’ve never changed it. Version 0.9.9 if it matters.

    I’ve set it to 600 and we’ll see how that works :)

  5. The Digitizor

    Media Player Classic (k-lite mega codec pack) certainly handles the Hi-Def videos in a much better way.

  6. Jen

    I’m not TOO sure but I think the most recent release (0.9.9) fixed that issue with the lagging because I haven’t experienced any ever since I updated. Again, I’m positive but I haven’t been noticing any drags and lags. But thanks for the tutorial!

  7. kingkarlit0s

    thanks for your tutorial, I was wanting to use VLC for my HD vids instead of MPC.

  8. noone

    thank you! you fixed my lag problem!

  9. Jacob Arthur

    Hey, I did this, set me Cache to 100000, now when I skip ahead It stops playing the audio, if I then set it to the start of the file I get audio to play. Any idea about what I can do to fix this?

  10. Steve

    I had a problem with periodic skipping on my HDTV when running it as a second monitor. The problem seemed to be a refresh rate issue and enabling triple buffering and increasing the cache fixed the problem completely. Thanks

  11. Paul

    Still doesn’t work for me. It caches the amount requested at the start and then just stops playing part way into the video. Playing HD720p AVI over wireless network via windows network file sharing.

    Most frustrating.


Leave a Comment




Leave your friendly comment here.

If you have a computer help question, click here to leave it on the forums instead.

Note: Your comment may not show up immediately on the site.

Our Friends
Getting Started


About How-To Geek
What Is That Process?
svchost.exe
jusched.exe
dwm.exe
ctfmon.exe
wmpnetwk.exe
wmpnscfg.exe
rundll32.exe
wfcrun32.exe
Ipoint.exe
Itype.exe
Wfica32.exe
Mobsync.exe
conhost.exe
Dpupdchk.exe Adobe_Updater.exe

Copyright © 2006-2009 HowToGeek.com. All Rights Reserved.