Important! This is an automatic machine translated page. If you can read english, you should Click Here to read the original English version of the article.

Display a list of Started Services from the Command Line (Windows) הצג רשימה של שירותים התחלה של שורת פקודה (Windows)

To interact with the services panel from the command line, Windows provides the Net utility. כדי לקיים אינטראקציה עם הפאנל שירותי משורת הפקודה, Windows מספק השירות נטו. From the command prompt, you can use this utility to start, stop, pause and continue services. משורת הפקודה, אתה יכול להשתמש בכלי שירות זה כדי להתחיל, לעצור, להשהות ולהמשיך שירותים. What most people don't realize is that you can also use this to display a list of services that are running on your computer. מה שרוב האנשים לא מבינים כי אתה יכול גם להשתמש בזה כדי להציג רשימה של השירותים הפועלים במחשב.

Syntax: תחביר:

net start להתחיל נטו

Provides this output(will vary based on your machine): זה מספק תפוקה (ישתנו בהתאם במחשב שלך):

These Windows services are started: שירותים אלה של Windows הם נכתבו:

Adobe Active File Monitor Adobe צג קובץ פעילים
Adobe LM Service Adobe LM Service
Application Layer Gateway Service Application Layer Gateway Service
Ati HotKey Poller ATI Hotkey Poller
Automatic Updates עדכונים אוטומטיים
Background Intelligent Transfer Service Background Intelligent Transfer Service
Bluetooth Service Bluetooth שירות
Cisco Systems, Inc. VPN Service Cisco Systems, Inc VPN שירות
COM+ Event System COM + Event System
Computer Browser דפדפן המחשב
Cryptographic Services שירותי ההצפנה
DCOM Server Process Launcher DCOM Server Process Launcher
DHCP Client לקוח DHCP
Distributed Link Tracking Client קישור מופץ מעקב לקוח
DNS Client שליטת לקוח
Error Reporting Service שירות דיווח השגיאות
Event Log יומן אירועים
FTP Publishing FTP Publishing
Help and Support עזרה ותמיכה
HID Input Service HID Input Service
HP WMI Interface HP WMI Interface
IIS Admin IIS Admin
Infrared Monitor צג אינפרא אדום
Logical Disk Manager מנהל דיסק לוגי
Machine Debug Manager שירות Machine Debug Manager
Microsoft Search חיפוש מיקרוסופט

This article was originally written on 09/13/06 Tagged with: מאמר זה נכתב במקור ב 09/13/06 עם שתייגת: Networking רשת , , Windows Windows

Daily Email Updates שערי עדכונים בדוא"ל

You can get our how-to articles in your inbox each day for free. אתה יכול לקבל כמה שלנו למאמרים לתיבת הדואר שלך בכל יום בחינם. Just enter your name and email below: פשוט להזין את שם ואת הדוא"ל שלך להלן:


Name: שם:
Email: דואר אלקטרוני:

Comments (4) תגובות (4)

  1. Vanguard ואנגארד

    The 'sc' command (Service Controller) is far superior to listing the services that are configured on your host. "הפקודה SC '(Service Controller) הוא עדיף בהרבה על רשימת השירותים אשר מוגדרים על המארח שלך. For example, to list all NT services but only those that are running (to equate to the 'net start' command), run: לדוגמה, הרשימה המלאה של כל השירותים NT אבל רק אלה הפועלות (להשוות כדי להפעיל את "רשת" הפקודה), להריץ:

    sc query type= service סוג השאילתה sc = שירות

    To see those that are defined but not running: כדי לראות אלו המוגדרים אבל לא פועל:

    sc query type= service state= inactive סוג השאילתה sc = שירות המדינה = לא פעיל

    And to see both running and stopped services: ולראות את שניהם פועלים שירותי עצר:

    sc query type= service state= all סוג השאילתה sc = שירות = כל המדינה

    Yes, the spaces are needed after the equals sign. כן, את החללים יש צורך אחרי סימן השוויון. Run “sc /?” to get all its help. הפעל "SC /?" לקבל את כל העזרה שלו. It is likely that 'sc' is only available on some versions of Windows (this was tested under Windows XP Pro). סביר להניח כי 'SC' זמין רק על כמה גירסאות של Windows (זה נבדק תחת Windows XP Pro).

  2. valanarasu valanarasu

    I am using Windows XP, my task manager and regedit has been disabled by a virus and I can not able to run install any antivirus. אני משתמש ב-Windows XP, מנהל המשימות שלי regedit הושבת על ידי וירוס ואני לא יכולה מסוגלת לרוץ להתקין אנטי וירוס. When I am trying to launch TASKMANAGER or REGEDIT a warning message shows it has been disabled by administrator. כאשר אני מנסה להפעיל TASKMANAGER REGEDIT או הודעת אזהרה זה מראה הושבת על ידי מנהל המערכת. Give me a solution. תן לי פתרון.

  3. Cliff Floyd קליף פלויד

    When I run “net start”, the output flashes on my screen and then disappears. כאשר אני מפעיל "להתחיל נקי", פלט מהבהב על המסך שלי ולאחר מכן נעלם. How do I display the results? כיצד אוכל להציג את התוצאות?

  4. shoro shoro

    Display one page at a time as follows: הצגת דף אחד בכל פעם, כדלקמן:

    net start | more להתחיל נטו | עוד

    Or you can stream your output to a file as follows: או שאתה יכול להזרים פלט לקובץ כדלקמן:

    net start > results.txt להתחיל נטו> results.txt


Our Friends חברים שלנו
Getting Started התחלת העבודה


About How-To Geek אודות How-To Geek
What Is That Process? מה זה תהליך?
svchost.exe svchost.exe
jusched.exe jusched.exe
dwm.exe dwm.exe
ctfmon.exe Ctfmon.exe
wmpnetwk.exe wmpnetwk.exe
wmpnscfg.exe wmpnscfg.exe
rundll32.exe rundll32.exe
wfcrun32.exe wfcrun32.exe
Ipoint.exe Ipoint.exe
Itype.exe Itype.exe
Wfica32.exe Wfica32.exe
Mobsync.exe Mobsync.exe
conhost.exe conhost.exe
Dpupdchk.exe Dpupdchk.exe Adobe_Updater.exe Adobe_Updater.exe

Copyright © 2006-2009 HowToGeek.com. זכויות יוצרים © 2006-2009 HowToGeek.com. All Rights Reserved. כל הזכויות שמורות.