One of our readers wrote in a while back asking why we hadn't featured the Send To Toys utility, a great addition to your Send To menu that lets you pick any folder to send a file to, send the file name to the clipboard, or a number of other useful features. Eden od naših bralcev wrote in nazaj, medtem ko sprašuje, zakaj ni izrazit Pošlji Igrače, uporabnost, odličen dodatek vašemu Pošlji meni, ki vam omogoča, da izberete poljuben zgibalnik poslati datoteko, pošljite ime datoteke v odložišče ali več drugih uporabnih funkcij. Today we'll show you how it works. Danes vam bomo pokazali, kako deluje.

Many of you might remember the old Send to X Powertoy that was included way back in the Windows 95 days. Mnogi od vas morda spomnite starih Pošlji X sila, ki je bil vključen poti nazaj v Windows 95 dni. The Send To Toys utility is a similar add-on that offers the same functionality, plus a lot more. Pošlji uporabnost Toys je podoben dodatek, ki ponuja enake funkcionalnosti, plus veliko več.

Installing Send To Toys Namestitev Pošlji Igrače

The installation process is very simple, and even gives you a quick configuration screen so you can turn on or off some of the features during install. Namestitveni postopek je zelo preprost, in tudi vam daje hiter screen konfiguracijo, tako da lahko vklopite ali izklopite nekatere funkcije med namestitvijo.

You can easily configure these items later, so don't worry about doing it now. Z lahkoto lahko nastavite te elemente kasneje, zato ne skrbi početje to zdaj.

Configuring Send To Toys Oblikovanje Pošlji Igrače

The installation process will open up the configuration dialog at the end, but if you want to get to it later, you can find it under Control Panel's Additional Options section. Postopek namestitve se bo odprla okno konfiguracije na koncu, vendar, če hočeš priti do pozneje, ga lahko najdete pod Dodatne možnosti «na nadzorni plošči v razdelku.

If you are running 64-bit Windows, you'll have to look under the 32-bit section as well… Če uporabljate 64-bitni operacijski sistem Windows, boste morali iskati v okviru 32-bitni oddelku, kot tudi ...

And you should see Send To Toys in the list. In bi morali videti Pošlji Toys na seznamu.

The first tab on the configuration dialog is extremely helpful… it lets you add or remove folders and items from the Send To menu. Prvi jeziček na konfiguracijo pogovorno je zelo koristno ... to vam omogoča, da dodate ali odstranite mape in predmete iz Pošlji menija. Of course without the utility you could do this manually by opening the shell:sendto folder and dragging and dropping, but this is a lot simpler. Seveda, brez korist vam lahko to storite ročno odpiranje lupini: sendto mapo in povlečete in spustite, vendar je to veliko preprostejše.

The Add button will pop up a dialog letting you quickly choose what to add to the menu. Dodaj gumb bo pop up okno vam omogoča hitro odločijo, kaj dodati v meni.

The Folder tab allows you to configure which folder is the default in the “Folder…” send-to item added by this utility (screenshots below). Mapa kartici vam omogoča, da nastavite mapo, ki je privzeto v "Folder ..." pošljite do postavka doda ta korist (screenshotovi spodaj). The two really interesting options here are the “Open destination on completion”, which will open up the folder you just sent the file to… and “Default to move”, which is pretty self-explanatory. Dve res zanimivo možnosti je "Open destinacijo na koncu", ki bo odprla mapo, ki ste jo pravkar poslal spis ... in "ne izpolniti obveznosti do prostega gibanja", kar je precej self-explanatory.

The Clipboard tab shows you some of the great options for the “Send to Clipboard (as name)” item… you can choose whether or not you want quotes, and whether you want files to be separated on different lines, if you send multiple files to the clipboard. Clipboard zavihek prikazuje nekatere velike možnosti za "Pošlji v odložišče (kot ime)" točka ... lahko izberete, ali želite kotacije, in ali želite datoteke, ki jih je treba ločiti na različnih progah, če boste poslali več datotek na odložišče.

The Default Mail Recipient tab was very promising, but that feature didn't work for me. Default Prejemnik pošte kartici je bil zelo obetaven, vendar da funkcija ni delo za mene. The idea is that you can specify a single mail recipient to send a file to… Ideja je, da lahko določite en naslov prejemnika poslati datoteko ...

But whenever I tried to use the feature I got this message… your mileage may vary. Ampak ko sem skušal uporabiti funkcijo sem dobil to sporočilo, vaš ... število prevoženih kilometrov lahko razlikujejo.

If that feature doesn't work for you either, you can easily just remove the item from the menu using the Send To configuration tab. Če ta funkcija ne deluje za vas ali, lahko enostavno samo odstranite element s pomočjo menija Pošlji konfiguracijo kartico.

Using Send To Toys Uporaba Pošlji Igrače

Now that you've run through the configuration dialogs, it's time to right-click a file and look at your Send To menu (mine is kinda messy) Zdaj, ko ste teči skozi konfiguracijo pogovornih, je čas, da z desno tipko kliknite datoteko in pogled na vašo Pošlji jedilnik (moja je nekako grdo)

One of the most useful items is the Folder… item, which pops up a dialog allowing you to copy, move, or just create a shortcut to the file. Eden od najbolj uporabne predmete je mapo ... element, ki pops up okno, ki omogoča kopiranje, premikanje, ali pa ustvarite bližnjico do datoteke.

Here's where this feature gets really helpful… if you click that little blue Folder link in the bottom left, you'll get a history drop-down of your recent folder choices. Tu je, če to funkcijo gets pošteno uslužen ... če kliknete, da malo modro mapo povezavo v spodnjem levem, boste dobili zgodovino spustnega svojih nedavnih mape izbiro.

If you sent the file to the Run… item instead, you'd get the Run dialog with the filename pre-populated… very helpful if you want to run the application with command line arguments easily. Če si poslal datoteko Run ... element namesto, bi vam pogovorno okno Zaženi s filename pred poseljenih ... zelo koristno, če želite zagnati vlogo s zapoved črta preprosto.

Send to Command Prompt works similarly, but pre-populates a command prompt with the name of the file. Pošlji zapoved uren deluje podobno, vendar pre-populates ukazni poziv z imenom datoteke.

You'll also notice new items when you right-click on an executable file, allowing you to quickly Add or Remove that application from the Send To menu. Opazili boste tudi nove točke, ko desni klik na izvedljivo datoteko, ki vam omogoča hitro Dodaj ali odstrani, da uporaba iz Pošlji menija.

Overall, it's a very useful utility, well worth checking out if you use the Send To menu a lot. Na splošno je zelo koristen pripomoček, tudi treba preveriti, če boste uporabili Pošlji meni veliko. Note that it works fine in any version of Windows. Upoštevajte, da to tovarna lep v kateri koli različici operacijskega sistema Windows.

Download Send To Toys from gabrieleponti.com Download Pošlji Igrače iz gabrieleponti.com