SEARCH

How-To Geek

Repair Missing External Hard Drive Database Error in WHS

If you’re using external hard drives with your Windows Home Server, they might get unplugged and create an error. Here we look at running the Repair Wizard to quickly fix the issue.

If an external drive that is included in your drive pool becomes unplugged or loses power, you might see the following error under Home Network Health when opening the WHS Console. To fix the issue verify the drive has power and is plugged in correctly and click Repair.

1repair

The wizard launches and you’ll need to agree that you may lose data during the repair of the backup database.

2repair

In this example it was a simple problem where an external drive became unplugged from the server…so you can close out of the wizard.

3repair

If you look under Server Storage you can see the drive is missing…To fix the issue verify the drive has power and is plugged in correctly.

4missing

WHS will add the drive back into the pool and when finished you’ll see it listed as healthy and good to go.

5back

Using external drives that are part of your storage pool may not be the best way to have your home built WHS setup, but if you do, expect occasional errors such as this.

Brian Burgess worked in IT for 10 years before pursuing his passion for writing. He's been a tech blogger and journalist for the past seven years, and can be found on his about me page or Google+

  • Published 06/14/10

Enter Your Email Here to Get Access for Free:

Go check your email!