i finally received my rma'd asus motherboard for this old compac i rebuilt. i'm retrofitting a usb hub in the front but i'm not able to match up the wiring from the usb wiring to the plugs on the motherboard. the motherboard is an asus itx-220.
here's what i have:
motherboard usb plug
1- usb+5
2-usb_p5-
3-usb_p5+
4-GND
5-
6-usb+5v
7-usb_p6-
8-usb_6+
9-GND
10-NIC
usb hub wires
1 red (1) +5V
2 white (1) -D
3 green (1) +D
4 blue (1) GROUND
5 brown (1) GROUND
6 orange (2) +5V
7 yellow (2) -D
8 gray (2) +D
10 brown (2) GROUND
any ideas how this goes? would they go in numerical order? i did get the original switch to work but there's no reset or lights (yet)
