Restore either system image backup or data backup.(44 posts)
The 1.7GB file that Macrium downloads during the WinPE recovery CD production is the WAIK and NOT the iso. The WAIK is a Microsoft installation kit that is used to produce the WinPE recovery disk.
The reason I uploaded the ready made WinPE iso file to skydrive is to save you the 2+ hours of WAIK download. The end result is the same. If you had produced it after downloading the WAIK, the resulting recovery file would also be 154MB.
Thank you so much indeed, Whs.
However, I have downloaded the WinPE you uploaded to SkyDrive. Then, I have burned it with a burning software. After that, I have booted from it. However, the WinPE didn't reconginse my external hard disk(Destination of my images) while it is connected to a USB3 port.
I really now have two WinPE(one which I have created from your ISO file, the second is from another form)
But both of them didn't recognise my Esternal hard disk while connected to a USB3 port. Though the tittle of the iso file I have donwnloaded from another forum is "Mcrium WinPE iso with USB3"
@The reason I uploaded the ready made WinPE iso file to skydrive is to save you the 2+ hours of WAIK download. The end result is the same. If you had produced it after downloading the WAIK, the resulting recovery file would also be 154MB. @
I have been still keeping with the 1.7GB file that Macrium downloads during the WinPE recovery CD production is the WAIK. So, Can I return to Macrium and then choose "create scure CD". After that, I will navigate to the location of WAIK. Next, I will complet the rest of steps. Finally: I will get WinPE revoey CD. ISO.
Besides, maybe WinPE recovery CD.iso which will be created by Macrium would recognise my external hard disk connected to a USB3 port.
Hmm, there used to be a problem with the USB3 which was supposed to be fixed with the release level of the WinPE I uploaded. Apparently that is not the case. Unfortunately I cannot test that right now because on the systems I have at this location I have no USB3 ports. I will test it when I am back in FL in November where I have such facilities.
Thanks a lot,
You do not think that if I had created WinPE with Macrium, WinPE would have recognised my hard disk while connected to a USB3 port.
In other words, I will let my external hard disk connected to USB3 port, and then I will return to Macrium and will click on "create scure bootable CD'. After that, I will follow the steps during Wizard. When I am asked to download the WAIK. I will not let it download it because I have been still keeping with the 1.7GB file that Macrium downloaded before.
Also, when I asked to locate the iso file, I will choose the path in which iso file(your file I have donwloaded) is. After that, I will click 'next'. Finally, Macrium will configure what needs to be added. Finally, I will get Macrium WinPE recovery CD which will recognise USB3 ports.
By the way, when I want to let Macrium create a scure CD. Will I have to have 'Macrium WinPE Recovery CD.iso' previously or during the porcess the program "Macrium" will download it? If I have to have the iso, then what is the benefit from that there is an option in Macrium to create a scure CD. If I had had an iso file, I would have burned it with any other burning software and then I would have Macrium WinPE Recovery CD.iso
I mean if I have returned to create a secure CD during Macrium, Should I let it download WAIK again, or the one I have been keeping it now is enough?
Second: As long as you said 'The 1.7GB file that Macrium downloads during the WinPE recovery CD production is the WAIK and NOT the iso.' Thus, If hadn't had a WinPE iso file , wanted to create secure CD during Macrium,where would I bring iso file.
I have really decided to try creating a secure CD during Macrium.
However, when I booted from the CD created, I saw that my external hard disk wasn't shown while connceted to USB3 port. Altough the external hard disk was connected while Macrium was creating a secure CD, the WinPE CD still donesn't recognise my hard disk while connected to USB3 port.
By the way, I am quite surprised that Macrium burned CD, although it isn't a burning software.
Thanks a lot
But now I would have two files:
F66CED9A65871A4B-00-00, which is in external hard disk(destination) and the other which is on Reflct folder where Macrium is installed( internal hard disk)
Second: Why would need repeating the same backup. If I had needed to do this, I would have created another new one.
When I have restored my computer via WinPE CD from one image created before by Macrium installed in my computer . Then when my Windows restored, I run Macrium installed on my desktop. However, I didn't see that Macrium recognised definition Backup xml file, although the file is still shown in my documents inside "Reflact" folder.
I think now I have gotten the reason which caused why xML didn't appear in Macrium.
After I created a full image at 2 AM yeserday, I have highlighted XML and clicked duble on it to create another full image by Macrium installed at 4 AM.
So, I think the XML updated.
Thus, when I restored from the image created at 2 AM, Macrium didn't recognise the XML, although it is "C:\Users\Mohammad\Document\Reflect\......XML
However, when I restored from the image created at 4 AM, Macrium recognised the xml.
Besides, I would like to ask you:
First: should I have more XML for each create image?
Second: in case that I install Macrim in another partition other OS's. For isnstance, D:\Users\Mohammad\Document\Reflect\......XML
And then, I create only an image for OS's partiton. When I restore from this image, the Macrium woud never find XML because it is D:\Users\Mohammad\Document\Reflect\......XML.
As a result, I think that someone who argues that it is quite good idea to install programs in another partition other than OS's (Defualt C:), he would be quite erroneous.
Xhi, could you confirm that you receive this window while your Windows boots after restoring your image by WinPE CD.
I, When I have restored my Windows via WinPE CD from image created by Macrium installed, then I exited from WinPE CD. I see my Windows while booting showed me this:
Windows Error Recovery
Windows didn't shut .........................
Select one option from ......
2-Start Windows normally.
When I clicked on Start Windows normally
I see Windows booted correctly
This topic has been closed to new replies. Please create a new topic instead.