SEARCH

The How-To Geek Forums Have Migrated to Discourse

How-To Geek Forums / Windows 7

I need help finishing these steps after burning the ISO image to cd 2

(2 posts)
  • Started 1 year ago by jason9922
  • Latest reply from raphoenix
  • Topic Viewed 2080 times

jason9922
Posts: 2

FROM HP TECH: Please provide me the Info.txt file from the unit which is required to create BIOS Admin tool to clear BIOS Admin password.
- You need to run the hpreadid.exe file which can be downloaded from the following FTP to proceed further on this unit.
- If Boot order does not allow you to do so, please remove the HDD from the unit and then it should boot from USB Device. Then perform the steps as below and share the output file.
1. Boot your unit to DOS using DOS bootable media. You may visit the following web link for detailed instructions on “How to Create a DOS Bootable USB Drive”
http://h20000.www2.hp.com/bizs.....R1002_USEN

HP Commercial Desktop/Notebook PCs - How to Create a DOS Bootable USB Drive
Information
During the course of the support process, HP may request that a utility or update be applied to test systems using a DOS Bootable USB Drive.
Details
Requirements :
1. Select a USB Drive that has a capacity of 4GB or less, and can be formatted (erasing all existing data).
2. FreeDOS:
o Download fd11src.iso from the following link:
Click here to download fd11src.iso at http://www.freedos.org.
NOTE: The above-mentioned URL will take you to a non-HP web site. HP does not control and is not responsible for information outside of the HP web site.
o Create a FreeDOS CD from the fd11src.iso image using CD writer software. Refer to the CD writer software documentation for information on creating a CD from an image file.

QUESTION***********THIS IS WHERE I GOT STUMPED, I OPENED THE ISO IMAGE AND BURNED THE FILES TO A DVD LIKE IT SAYS, “CREATING A CD FROM AN IMAGE FILE” –AFTER THIS I HAVE NO CLUE HOW TO PROCEED WITH THE REST OF THESE STEPS TO MAKE THE BOOTABLE USB, I HAVE NO CLUE WHAT HPUSBFW IS, WHERE IT IS, WHAT I NEED TO DO ETC.

3. HPUSBFW:
o Download a BIOS update softpaq for a recent HP commercial notebook (8740w, for example). Although this step references software that is specific to HP commercial notebooks, the process will produce a DOS bootable USB drive for use with HP commercial desktop and notebook computers.
o Expand the contents of the softpaq without initiating the BIOS update:
 Open a Command Prompt from Windows.
 Navigate to the directory where the softpaq was downloaded to.
 Execute the following command to extract the softpaq contents:
sp????? -e -fc:\swsetup\sp????? -s
Where sp????? is the file name of the softpaq.
 Exit the Command Prompt.
o HPUSBFW.exe will be located in the directory c:\swsetup\sp?????\ .
Process :
1. Remove all USB Drives and other removable storage (such as memory cards connected to attached printers) from the computer where HPUSBFW is located. Failure to do so may result in misidentification of the USB Drive and data loss due to formatting.
2. Connect the selected USB Drive to computer where HPUSBFW is located.
3. Launch HP USB Disk Storage Format Tool by double-clicking HPUSBFW.EXE from within Windows.
4. The USB Drive should be automatically detected by HP USB Disk Storage Format Tool . If not, select the correct drive from the Device drop down list. Failure to select the correct drive may result in data loss.
5. Select FAT32 from the File System drop down list.
6. Check the box next to Create a DOS startup disk using system files located at: .
7. Insert the FreeDOS CD and browse to the following path in HP USB Disk Storage Format Tool :
D:\FREEDOS\SETUP\ODIN
Where D:\ is the drive where the FreeDOS CD is inserted.
8. Select Start in HP USB Disk Storage Format Tool .
When the format is complete, select Close in HP USB Disk Storage Format Tool . The USB Drive is now DOS bootable. Remove the USB Drive and FreeDOS CD from the computer.

(REST OF ORIGINAL INSTRUCTIONS FROM EMAIL HP SENT)
2. Once you have boot to DOS, run the HPREADID file as: hpreadid.exe > unit.txt
3. Send unit.txt back to me as an attachment to this email.

Please download the tool from the following weblink
Login: rfvtgb09
Password: 3sp}AQ7e (NOTE: CASE-sensitive)
FTP Access: ftp://rfvtgb09:3sp}AQ7e@ftp.usa.hp.com/
or: ftp://rfvtgb09:3sp}AQ7e@15.192.32.78/

Posted 1 year ago
Top
 
raphoenix
raphoenix
Posts: 14920
 



Topic Closed

This topic has been closed to new replies.

Get Free Articles in Your Inbox!

Join 134,000 newsletter readers

Email:

Go check your email!