I have been trying to write Windows 7 RC to a DVD on Ubuntu Jaunty. I am using Maxell DVD-R's with 4.7 GB (advertised at least) Max burn speed of 16x.

The disc will write an image-check sum or something like that for 10 minutes, then say it's burning data to the disc. It then closes saying error. I can't seem to figure out what is wrong, I keep trying different discs, making sure they don't have data on them and whatever, tried writing at a slower speed too.

This is the end of the error log I saved, if you need more of it to help then I will put it up, but it's a rather lengthy log...

Operation starts.
BraseroWodim stdout: Waiting for reader process to fill input buffer ... input buffer ready.
BraseroWodim stdout: Performing OPC...
BraseroWodim stdout: Sending CUE sheet...
BraseroWodim called brasero_job_get_input_type
BraseroWodim called brasero_job_set_current_action
BraseroWodim stdout: Starting new track at sector: 0
BraseroWodim stdout:
BraseroWodim stderr: Errno: 5 (Input/output error), write_g1 scsi sendcmd: no error
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: CDB: 2A 00 00 00 00 00 00 00 1F 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: status: 0x2 (CHECK CONDITION)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Bytes: 70 00 03 00 00 00 00 0A 32 4D 03 0C 0C 00 00 00
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Key: 0x3 Medium Error, Segment 0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense Code: 0x0C Qual 0x00 (write error) Fru 0x0
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: Sense flags: Blk 0 (not valid)
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: cmd finished after 16.628s timeout 200s
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: A write error occured.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: Please properly read the error message above.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: Track 01: 0 of 2385 MB written.
BraseroWodim stdout: write track data: error after 0 bytes
BraseroWodim stdout: Writing time: 35.437s
BraseroWodim stdout: Average write speed 83.7x.
BraseroWodim stdout: Fixating...
BraseroWodim called brasero_job_set_current_action
BraseroWodim stdout: Fixating time: 0.009s
BraseroWodim stderr: wodim: fifo had 255 puts and 1 gets.
BraseroWodim called brasero_job_get_flags
BraseroWodim stderr: wodim: fifo was 0 times empty and 0 times full, min fill was 100%.
BraseroWodim called brasero_job_get_flags
BraseroWodim stdout: HUP
BraseroWodim stderr: HUP
BraseroWodim process finished with status 254
BraseroWodim called brasero_job_error
BraseroWodim finished with an error
BraseroWodim asked to stop because of an error
error = 0
message = "no message"
BraseroWodim stopping
BraseroWodim got killed
Session error : unknown (brasero_burn_record burn.c:2602)