Subscribe to How-To Geek

Login / Signup

Welcome to the How-To Geek Forums

We encourage you to register on our forums and post any questions you might have. The How-To Geeks monitor this forum and will respond to your question quickly.

How-To Geek Forums » Geek Stuff

Acer ferrari 4000 laptop

(4 posts)
  • Started 7 months ago by flower27
  • Latest reply from Smashpmk712
  • Topic Viewed 447 times


flower27
Posts: 2

Hi Geeks,

How to insert touchpad cable back in the connector on the motherboard?
How to unlock the connector on the motherboard so cable can be inserted in?
Here is a link with image:http://www.kriyayoga.com/how_to/how_to_replace_keyboard_and_ram_ferrari-4005.html
I'm referring to (image 6)counting from top-white cable label 7252-H VW-1.
Any suggestions is appreciated.

Thanks

Posted 7 months ago #
 
Smashpmk712
Smashpmk712
Posts: 313

You have to pull the top ( the portion that looks a little more off white) of the white connector (on the motherboard) out towards the blue part of the cable in the picture. once you have done that you can insert the cable in and push the connecter back together. I have done quite a few of these and the first few wre kinda tricky .....

Posted 7 months ago #
 
flower27
Posts: 2

Hi Smashpmk712,

I have tried to follow your suggestion but that top part is hard to move any suggestions as to tools required for this or image on how to?

Thanks

Posted 7 months ago #
 
Smashpmk712
Smashpmk712
Posts: 313

A lot of times it may not seem like that cable is in but it is ... like I said they are tricky. the best way to find out if it worked is to test it.

Posted 7 months ago #
 

RSS feed for this topic

Reply

You must log in to post.

Sponsored Links
Getting Started
About How-To Geek
Popular Articles

Copyright © 2006-2008 HowToGeek.com. All Rights Reserved.