• ARTICLES
SEARCH

How-To Geek

Learn How to Make HDR Images in Photoshop or GIMP With a Simple Trick

sshot-373

HDR tone mapping is everywhere these days; it’s sort of like Auto-Tuning equivalent of photography. Want to create High Dynamic Range images without the “HDR” look? Open up Photoshop or GIMP, and get ready to hack some images!

If you remember from our previous article, HDR is a blanket term for drawing out lots of detail from multiple exposures and loads of artful techniques, all with the intention of creating images with detail beyond the capabilities of normal cameras. Keep reading to see how a few photographs, manual settings, and image editing skills can create amazing HDR photographs.

 

Photoshop HDR Pro and Other Tools

sshot-366

Yes, before we start, we should cover this point. We won’t be discussing any tone mapping HDR programs in this article, like Adobe’s Photoshop plug in, HDR Pro, or Photomatrix. Instead, we’ll be covering a technique for manually combining image data to create a rich looking HDR image without any complicated tone mapping software.

sshot-348

Don’t fret—we will be covering how to create tone mapped images in the foreseeable future, but for today, we’re going to learn how to get rich results without that obvious “HDR Look.”

Taking Bracketed Photographs

sshot-343

One of the keys to creating HDR images is bracketing your exposure. For this example, we’ve photographed this still life multiple times, each with different manual settings.

This is called “bracketing,” and it involves taking a shot multiple times (presumably with a tripod) while changing the exposure by stopping up or down the various elements: aperture, shutter speed, and ISO. In our example, we’ve kept the same ISO and aperture settings, adjusting the length of the exposure to allow more light to the sensor. Note the detail in the light bulb in the darkest images, while the brightest images show more detail in the shadow areas.

Take as many photographs of your image as you care to, adjusting each exposure by one stop. It’s always better to to take more images than you need and bracket way to much than to bracket too little and be sorry later.

 

“Hacking” an HDR Image with Photoshop or GIMP

sshot-355sshot-356sshot-357

With the proper images, it’s possible to build an HDR image in Photoshop or GIMP. We’ve taken three of our images. The first one uses ISO 200 (very slow, better detail, less grain) and an f25 (blocks most of the light) aperture setting at a very fast shutter speed. The third one uses the same ISO and f stop setttings, but uses a much slower shutter speed, possibly as slow as 15 seconds. The first has great detail in the brightest areas (you can read the text on the lightbulb) and the third image has detail the other images lack in the shadows.

The middle image was taken using the same tripod composition, opting instead for auto settings and a flash exposure. This, more so than the manual exposures with auto white balance, gives a naturalistic image, although it is devoid of detail, both in the bright highlights and dark shadows. Our goal is to transform that “so-so” image into a rich, detail filled HDR image with these three exposures.

sshot-355

We start with our darkest image, and set it to be our base layer. Simply open your darkest image in Photoshop or GIMP and go from there.

sshot-358sshot-356

Add your “middle” exposure to a layer on top of your darkest exposure, and set that layer to a Blending Mode of “Screen.” (GIMP simply calls this “Mode.”) You can find this setting in the layer panel of either program.

On a related note, if you weren’t careful when exposing your shots, you might find that your entire image or various parts of it move around, causing you to have to shift your image and fit your layers together. This can be tough to avoid, although using a tripod and taking careful shots can certainly help.

 

sshot-359sshot-370

As shown above, we create a layer mask on the “middle” exposure layer to block out the area that completely overwhelm the detail. You can create a layer mask in Photoshop by selecting this layer, and clicking the mask button in the layers panel. In GIMP, you can simply right click, and select “Add Layer Mask.”

Use the brush or eraser to subtly mask out areas in your image that you don’t want. The dark areas on the image on the left represent the masked out (or “hidden”) parts of the “middle” exposure. You can see the mask combined with the two layers on the right, with red halo representing the parts of the lamp that are masked out.

(Author’s note: For the sake of brevity, we’ve not taken a lot of time to explain what a layer mask actually is here. If you’re a bit rusty, you can read all about them and how to use them in this article.)

sshot-360

Our image now has details in the highlight that weren’t possible with a single exposure. Let’s see if we can’t do something about the dark, foreboding shadows in the background.

sshot-361

This exposure is bright, and packed with lots of shadow detail. The highlights are washed out the point of being pure, detail-free whites, but the shadows and midtones can prove very useful to our HDR image.

sshot-367

sshot-363

Paste your shadow exposure into a third layer on top of the rest. Set it to “Screen” and reduce the opacity (both options available in GIMP and Photoshop in similar places in the layers panel).

You may find that your shadow image does not need as much reduction of opacity, depending on how much light it was exposed to, so use whatever opacity works best for you. 33% is not a perfect, one size fits all solution.

sshot-369

Create a layer mask on your shadow exposure (just like before) and use your paintbrush (or eraser) to mask out the areas you don’t want. In this example, we’ve masked out the parts of the image that are shown here as red. This allows us to have dark, rich shadows in the areas you would expect them to fall, while allowing the subtle wood grain texture to appear in the previously detail-free black parts of the shelving.

sshot-364

Our final image is the successful, subtle combination of three exposures, that has detail that rivals tone mapped HDR images—except without the halos, ghosting, and that obvious “HDR photo” look. If you just want a good, rich HDR image, you could certainly do worse than making your own this way.


Have questions or comments concerning Graphics, Photos, Filetypes, or Photoshop? Send your questions to ericgoodnight@howtogeek.com, and they may be featured in a future How-To Geek Graphics article.

Image Credits: WF Fancier 535 by F 5.6, available under Creative Commons. All other images by the author.

 

Eric Z Goodnight is an Illustrator and Graphics Geek who hopes to make Photoshop more accessible to How-To Geek readers. When he’s not headbanging to heavy metal or geeking out over manga, he’s often off screen printing T-Shirts.

  • Published 06/8/11

Comments (9)

  1. Josh B.

    very nice

  2. Scott

    I like it and though I know it would require more work and a some careful “footwork” you could probably do this with photofiltre as well.

  3. Art€

    Excellent article; thanks a lot! I’ll have a go at it.

  4. guddo

    I have some rear type pictures of my family, but these are dark( capture in low light). who or which software can help me to improve these , brighter them? awating responce from someone, thanks, (guddo).

  5. nekretsrof911

    gimp should be able to help you with this problem and its free!the detail is still in the photo but it is just underexposed,you should be able to lighten it up to an acceptable level.if you have any photo editing software on your computer it should have a “lighten “function somewhere,try and work on a copy of your pictures and just experiment a little bit,if you make a mistake you will still have the originals to go back to

  6. crab

    @guddo:

    Get GIMP (it’s free)
    Open image
    Make duplicate layer
    Set duplicate layer’s mode to “screen”
    Adjust layer transparency so it looks right, or if it’s still too dark, add another screen layer

  7. TheFuzz

    Is that a bong on the table?

  8. Eric Z Goodnight

    Pretty sure it isn’t, but I seriously have no idea what it is.

  9. Logan

    As an aside, if you only have one photo and you need to pull more detail from areas that look washed out or too dark, the Shadow/Highlight tool in Photoshop is very useful.

    Some cameras I’ve owned needed boosted shadow detail for every shot – there was so much detail there that was difficult to see before it was adjusted.

Enter Your Email Here to Get Access for Free:

Go check your email!