Earlier this week we asked you to share your tech spring cleaning routine; now we’re back to highlight your tips, tricks, and techniques.
What tools rule the spring cleaning roost? Compressed air and microfiber cloths are the tools of choice by a wide margin. D^Angelo highlights the software and physicals tools he uses:
Backup all the important stuff just to be safe (c:/, my documents, desktop, drivers)
Cleaning the dust with some office depot compressed air, avoiding spinning the fans.
Use a brush for that small places (fans, memory, capacitors, etc).
Use some dielectric spray on the motherboard.
If the pc turned on without problems its time to use ccleaner,
Check if there is a toolbar installed or another unusual software that I don’t want.
Run my antivirus software or malwarebytes; some defraggler maybe.
Finally check for updates in windows and other important software.
My computer is ready for another 6 months non-stop working schedule.
On monitor use a dry cloth only (monitor turned off), in keyboard and mouse use some compressed air + office depot keyboard foam cleaner.
Lady Fitzgerald shares her full computer/peripheral cleaning routine:
I open up my desktop PC every month or so and carefully blow out any dust with canned “air.” Like D’Angelo, I avoid spinning the fans only I make sure they don’t spin by using a small wooden stick to keep them from spinning.
My netbook gets the keyboard blown of with canned ” air” and wiped down with a microfiber cloth that has been lightly sprayed with LCD cleaner. My dsktop keyboard gets the same treatment and my mice get wiped down with a moist LCD cleaner. All of mice are optical so I don’t have to worry about cleaning the ball and internal rollers anymore
The rest of my gear I clean as needed. I wipe off exteriors with a microfiber cloth that has been lightly sprayed with LCD cleaner. I clean LCD screens by gently brushing off as much dust as possible with a soft brush, blow off any remaining dust with canned “air,” spraying lightly with LCD cleaner, and gently wiping clean with a clean microfiber cloth. Stubborn spots I get off by wetting a corner of a microfiber cloth with LCD cleaner and use that to carefully scrub at the spot, then wipe clean with the dry portion of the cloth. I make my finishing strokes vertically.
I clean the platten of my flat bed scanner as needed the same way I clean LCD screens.
My Fujitsu ScanSnap S1500 ADF scanner gets cleaned as needed. Blowing out dust is verboten since it can cause dust to be blown into the cameras (Fulitsu’s term). I use a vacuum cleaner to get the dust out. While vacuuming , I also remove the feed roller and pressure pad and vacuum behind them. The pad and roller get ink buildup removed with Fujitsu’s F1 cleaner, then I put them back in place. I wet a corner of a microfiber cloth with LCD cleaner and gently clean the camera plattens, then wipe dry with a the dry portion of the cloth. I then lightly moisten the microfiber cloth with LCD cleaner and wipe down all exterior surfaces. Adter clean, I feed a sheet of white paper through to make sure the roller and pad have dried and aren’t leavinbg tracks on the paper.
About all I have to do with my old HP Laserjet 1300 printer is brush and blow away dust and wipe down the exterior. If the printouts start to smudge a bit, I run some blank paper through the cleaning cycle. The thing seems to thrive on neglect.
My external hard drive just gets wiped down as needed.
To clean the works of my computers, I run weekly scans with Avast free, MBAM, Spybot S&D (TeaTimer runs full time), SAS, and Glary Utilities.
Semiretired highlights a type of spring cleaning we really need to do around the How-To Geek offices:
My spring cleaning is going to the garage and deciding which parts I will actually use, and which computers, laptops and TVs are worth rebuilding, then trashing the rest. As for my everyday computers, I am perpetually behind as far as upgrading, organizing, backing up, and cleaning up and tidying the wires. My towers actually stay pretty clean, because I keep them away from the floor. I scrutinize the tower fans and power supply fans a couple times a year.
Spring used to mean rebuilding a few computers while watching baseball on the television in the garage (mostly listening)…………I miss that.
Just the other week someone was asking “How did we get an entire box of DVI cables?”—sounds like it’s time to take Semiretired’s advice and start sorting through things for the recycling bin.
Have a cleaning tip to share? It’s not to late; sound off in the comments!