High-gain projector screen are quite pricey; this DIY hack uses glass sand blasting beads to mimic the highly reflective surface of commercial high-gain screens.
Sean Michael Rogan, over at MAKE magazine, stumbled upon a particularly clever way of rolling his own high-gain screen. What’s the secret sauce in his method? Glass sand blasting beads from tool discount store Harbor Freight provide the high-gain reflectivity. First he build his screen, then he painted it with white latex paint, finally–after applying the second coat and while it was still wet–he liberally sprinkled the glass sand blasting beads all over it. After leaving it to dry and brushing the loose beads off, the final product is a white screen with a micro-layer of highly reflective glass beads embedded in it.
Hit up the link below for a full step-by-step guide and, if you’re curious, check out his original tests that led the final mixture.
Glass Bead Projection Screen [Make]
Jason Fitzpatrick is warranty-voiding DIYer and all around geek. When he's not documenting mods and hacks he's doing his best to make sure a generation of college students graduate knowing they should put their pants on one leg at a time and go on to greatness, just like Bruce Dickinson. You can follow him on Google+ if you'd like.
- Published 02/23/12